This product is used for filtration control in all types of water base drilling fluids ranging from fresh to salt saturated waters
1. This product is used for filtration control in all types of water base drilling fluids ranging from fresh to salt saturated waters.
2. It also has shale inhibitive characteristics. It meets API 13A specification.
1. This product is used for filtration control in all types of water base drilling fluids ranging from fresh to salt saturated waters.
2. It also has shale inhibitive characteristics. It meets API 13A specification.
Usage & Dosage
1. This product could be added into drilling fluid directly or slowly added into water to form dense
colloid solution in case of forming blocks to influence solution rate.
2. Suggested dosage is 1 %.
Package
1. The product is usually kept in a compound or multi-wall bags, with each net weight 25 kg
2. Special packages are available based on customers' requirements.
3. Every 20-feet container can hold 14-16 tons if add the tray.
Storage
1. The product should be kept in shady, dry and ventilated warehouse where environment temperature is controlled below 122F and relative humidity is under 50%.
2. It should be prevented from sun and rain, and positioned in some place away from heat and fire; the recommendation for bag piles is no more than 8 layers.
3. It should not be utilized without check and must be qualified if out of expiration(one year).
Safety
1. Avoid contacting with eyes, skin and clothing. Otherwise, wash with a flush of water.
2. Refer to Material Safety Data Sheet (MSDS) for complete handling and hazard data.
